Home     Forum     401k     401k Rollovers     Crypto Forum
    Register   Login   Members   Search   FAQs     Recent Posts    



Glass door installation process

Reply to topic
Money Talk > Earning & Income

Author Thread
ahwhglass
New Member


Cash: $ 1.25

Posts: 4
Joined: 09 Apr 2018

Glass door installation process  Reply with quote  

Goblet door installation method 10 small steps to do easily

The glass door may be a special door in the life. It is powerful door. The glass found in the current glass door is especially divided into tempered a glass and ordinary float a glass, and generally has any thickness of 12 mm (mm). Manufactured from glass, it is tough with tempered glass. So it's safe. And now the glass doors are constructed with clear glass, and these have very good lighting overall performance. Then, Xiaobian will tell you about the knowledge of your glass door, and I hope that it'll be very helpful to anyone.



1. Positioning of the pay-off: The glass door coupled with the fixed glass and also the movable glass door leaf can be uniformly positioned for location.

2. Limiting groove with the top of the mounting frame: The width from the limiting slot should be in excess of 2-4mm for the glass thickness and 10-20mm for that groove depth. When fitting, firstly pull out each metal decorative board edges with the drawn line, and then press the side line to install the limit slot with the top of the home frame.

3. Install the wooden bottom with the metal veneer: first fix the square wood for the ground, then stick the metal veneer on the wood with the universal glue. The square wood may be directly nailed to this pre-embedded wooden brick, or with the expansion bolt. The method of connection is fixed.

5. Install the vertical doorway frame: connect the center line of the bullet to this door frame, then develop plywood to determine the shape and position of that door frame column, fifth wrap the metal cosmetic surface.

5. Install this insulated glass factory: use a tumbler suction cup machine in order to suck the thick goblet, then hold the suction cup to lift the wide glass plate by 2-3 people and move it towards the installation position.

6. Preset glass: Two small square wooden strips around the bottom and side belonging to the wooden block are placed in the middle door, the square wood strip is going 4mm away from your glass plate surface, after which it the universal glue is painted to the square wooden strip. The facing metal is stuck for the square strip.

7. Injection glass seal: In the gap between the very best limit groove and the underside bracket, and the gap concerning the thick glass as well as frame column, the goblet seal is injected.

EIGHT. Docking between glass: When the fixed a part of the glass door should be spliced by the oversize, the seam should have a width of 2-3mm, as well as the edge of the glass really should be chamfered.

9. Installation regarding moving glass door leaf: Ahead of the door leaf is put in, the grounding spring as well as positioning pin on the top end surface of the door frame should be positioned and installed. The 2 must be coaxial. Check the vertical collection during installation to ensure the biggest market of the ground spring shaft and the positioning pin. The lines are on the same line.

10. Installation the glass door leaf top and lower door clamps: Install top of the and lower metal door clips for the upper and lower ends with the glass door and measure the height belonging to the door.

Today's glass doors have grown common in our world, and there are many kinds of glass doors, including decorative glass doors, protection glass doors, energy-saving glass doors, coated glass gates, induction glass doors, and so forth. But no matter which types of glass door has superior noise reduction performance, windproof performance, dustproof performance and so on. Therefore, it is traditional in many industries, including hotels, hotels, banks, place of work buildings, hospitals, shops, and so on.,and the most very popularly used is the pedal-sensing tumbler door.
Post Fri Dec 14, 2018 8:45 am
 View user's profile Send private message Visit poster's website
ranjith422
Senior Member


Cash: $ 87.35

Posts: 466
Joined: 07 Mar 2018
Location: New York City
 Reply with quote  

Nice Post.
Thanks for sharing.

observations and solutions for cable companies
Post Wed Mar 11, 2020 4:18 pm
 View user's profile Send private message Visit poster's website

Reply to topic
Forum Jump:
Jump to:  
  Display posts from previous:      


Money Talk © 2003-2022

Crypto Prices